Warewashinggreen&clean hood type Dishwasher, Manual with ESD, Continuous Water Softener & Filtering System (COD 504255)
Where to buy
Warewashinggreen&clean hood type Dishwasher, Manual with ESD, Continuous Water Softener & Filtering System
green&clean Hood Type - double skin manual

Warewashing
green&clean hood type Dishwasher, Manual with ESD, Continuous Water Softener & Filtering System

COD 504255

Hood Type Dishwasher, with double skin insulated manual hood, Wash Safe Control, Energy Saving Device (ESD), built-in continuous water softener, built-in detergent dispenser, rinse aid dispenser and drain pump, 80r/h

Where to buy

Specifications

  • Supply voltage: 400 V/3N ph/50 Hz

    Convertible to: 230V 1N~; 230V 3~

    Default Installed Power: 9.9 kW

    Boiler Heating Elements Power: 9 kW

    Tank heating elements: 3 kW

  • Water supply temperature*: 10-20 °C

    Drain line size: 20.5 mm

    Inlet water supply pressure: 0.5-7 bar

    Water consumption per cycle (lt): 2

    Boiler Capacity (lt): 12

    Tank Capacity (lt): 24

  • N° of cycles: 3

    Duration cycle:* 45/84/150 sec.

    Duration cycle - NSF/ANSI 3 compliant: 57/84/150 sec.

    Racks per hour:* 80

    Racks per hour - NSF/ANSI 3 compliant: 63

    Dishes per hour:* 1440

    Dishes per hour - NSF/ANSI 3 compliant: 1134

    Wash temperature: 55-65 °C

    Wash temperature - NSF/ANSI 3 compliant: 75 °C

    Rinse temperature: 84 °C

    External dimensions, Width: 752 mm

    External dimensions, Depth: 755 mm

    External dimensions, Height: 2273 mm

    Net weight: 150 kg

    Shipping weight: 139 kg

    Shipping weight (ESD): 35 kg

    Shipping volume: 1.23 m³

    Shipping volume (ESD): 0.33 m³

    Packaging size

    (WxDxH): 920x770x1730 mm

    Packaging size ESD (WxDxH): 730x930x480 mm

    Noise level: <63 dBA

  • Air Flow: 28 m³/h

    Air temperature: 26 - 29 °C

    Air humidity: 55%


    * productivity guaranteed at any supply temperature allowed in the range above. To ensure full energy recovery, an extra 11 seconds is required.

    Latent heat: 350 W

    Sensible heat: 1490 W

Product Features

NSF/ANSI 3 and DIN 10512 compliant.
45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).
Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.
Built-in high efficiency Energy Saving Device (ESD) transfers the heat captured inside the machine to the incoming cold water before entering the boiler, thus saving energy; no ventilation hood is needed for the machine (depending on local regulation and conditional on compliance with VDI 2052).
CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
Requires only 2 liters of water per washing cycle thus ensuring low energy, water, detergent and rinse aid consumption.
Continuous Water Softener (CWS) to ensure that 100% of the water entering the dishwasher is softened thus providing spot-free results.
Automatic regeneration of CWS during the wash cycle, based on water consumption, guarantees non-stop dish washing.
Built-in atmospheric boiler sized to raise incoming cold water to a minimum of 84 °C for sanitizing rinse. No external boiler is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.
Incorporated Soft Start feature to offer additional protection to more delicate items.
Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
Cycle may be interrupted at any time by lifting the hood.
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.
Three phase electrical connection, convertible to single phase on-site.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.
Pressed tank in front position to facilitate cleaning.
Double skin insulated hood.
Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.
Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.
Pre-arranged for on-site HACCP implementation and Energy Management device.
Element protection from dry fire and low water.
Unit to include drain, detergent and rinse aid dispenser pumps

Complete the form below to request more information

Select your country

 

Global


Global

Americas


North America

América Latina (Español)

Brasil

Middle East & Africa


Middle East & Africa (English)

South-East Asia and Oceania


South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

ประเทศไทย

Europe


België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×