Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Built-in atmospheric boiler sized to raise incoming water to a minimum of minimum 84 °C for sanitizing rinse. No external booster is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.
Extra heavy rack support suitable to wash heavyweight plates, dishes or containers.
45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).
Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.
NSF/ANSI 3 and DIN 10512 compliant.
Automatic regeneration of CWS during the wash cycle, based on water consumption, guarantees non-stop dish washing.
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
Cycle may be interrupted at any time by lifting the hood.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
Three phase electrical connection, convertible to single phase on-site.
Continuous Water Softener (CWS) to ensure that 100% of the water entering the dishwasher is softened thus providing spot-free results.
Incorporated Soft Start feature to offer additional protection to more delicate items.
Pressed tank in front position to facilitate cleaning.
Unit to include drain, detergent and rinse aid dispenser pumps
Double skin insulated hood.
Element protection from dry fire and low water.
Pre-arranged for on-site HACCP implementation and Energy Management device.
Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.
Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.
Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.
