Water Treatment Kit water softener for rack type (COD 865284)
Where to buy
Accessories for Single Rinse Rack Type dishwashers

Water Treatment
Kit water softener for rack type

COD 865284

Kit water softener for Rack Type dishwasher

Specifications

  • Supply voltage: 230 V/1 ph/50 Hz

    Total Watts: 0.25 kW

  • External dimensions, Width: 828 mm

    External dimensions, Depth: 510 mm

    External dimensions, Height: 730 mm

    Net weight: 60 kg

    Packaging size(WxDxH): 800x1200x1120 mm

  • Inlet water supply pressure: 2-6 bar

    Inlet water supply hardness (MAX): 60°fH / 32°dH

    Incoming water line size: 3/4"

    Water flow rate at 15°C: 16 l/min

    Upstream water softener recommended if water chlorinated concentration > 0.5 mg/l

Product Features

The water softener treats the water before it feeds into the dishwasher. The supply water is decalcified, the calcium carbonate is substituted by water soluble salts.
Two cylinders for cold water alternate water softening and resin regeneration supply continuous water flow for non-stop dishwasher operation. While cylinder for hot water will be programmed the regeneration intervals depending on required capacity and inlet water hardness.
Flow rate of 16 l/min at 15°C.
Three big brine containers regenerate each resin cylinder automatically.
Each brine container has floating sensor to monitor the salt level and provide the warning signal in case of missing salt.
Equipped with manual by-pass allows in case of malfunctions to exclude the water softener system for continuous function of the dishwasher.
The kit can be installed under the handling tables of the dishwasher.
Resin cylinders and salt containers are built in a skid for easy handling and storage.
Incorporates two resin cylinders for cold water with 13 liters each and 12 liters resin cylinder for hot water.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×