Main Features
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
All major compartments located in front of unit for ease of maintenance.
Deep drawn V-Shaped wells.
Flame failure device on each burner.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Interior of wells with rounded corners for ease of cleaning.
IPx4 water protection.
Oil drains through a tap positioned on the front the wells.
Overheat protection thermostat as standard on all units.
Piezo spark ignition for added safety.
Thermostatic regulation of oil temperature up to a maximum of 185 °C.
Two high efficiency 7 kW burners in stainless steel with flame failure device attached to the outside of the wells.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Suitable for countertop installation.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Deep drawn V-Shaped wells.
Interior of wells with rounded corners for ease of cleaning.
Two high efficiency 7 kW burners in stainless steel with flame failure device attached to the outside of the wells.
Thermostatic regulation of oil temperature up to a maximum of 185 °C.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Oil drains through a tap positioned on the front the wells.
All major compartments located in front of unit for ease of maintenance.
Piezo spark ignition for added safety.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPx4 water protection.
Construction
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
One piece pressed 1.5 mm work top in Stainless steel.
All exterior panels in Stainless Steel with Scotch Brite finishing.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.