Warewashing Medium pre-wash zone for dual rinse rack type dishwasher, electric, 50Hz (COD 535095)
Where to buy
Dual Rinse Rack Type dishwashers - Pre-washing modules

Warewashing
Medium pre-wash zone for dual rinse rack type dishwasher, electric, 50Hz

COD 535095

Medium pre-wash zone for green&clean Dual Rinse Rack Type Dishwasher

Specifications

  • Supply voltage: 380-415 V/3N ph/50 Hz

    Default Installed Power: 7.37 kW

    Pre-wash tank heating elements: 7 kW

    Pre-wash tank heating elements are activated only during sanitation cycle.

    Pre-wash pump size: 0.37kW

  • Pre-wash tank size: 35l

  • Pre-wash temperature: 10-40°C

    External dimensions, Width: 560 mm

    External dimensions, Depth: 825 mm

    For transportation purpose only, the depth can be reduced to 795mm by the door handle.

    External dimensions, Height: 1785 mm

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Charging hole size (height): 490 mm

    Net weight: 104 kg

    Shipping weight: 123 kg

    Shipping height: 2030 mm

    Shipping width: 910 mm

    Shipping depth: 700 mm

    Shipping volume: 1.29 m³

    Reference norm used to measure the noise:
    IEC60335-2-58 annex AA.

  • Noise level: <62 dBA

Product Features

Adjustable feet for full access underneath the machine for cleaning.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.
Manual process of pre-wash spraying replaced by automatic prewash module before the main wash section.
The feeding direction can be either left to right or right to left as it's reversible on site.
Large counter balanced inspection door allows unrestricted all-round access to the internal area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
Automatic drain, clean and sanitize cycles featured as standard. The internal chamber, including the internal door is completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
Deep drawn pressed tank with fully rounded corners, sloped towards the drain to prevent dirt build-up, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.
The unit must be connected with dual rinse rack type dishwasher.
All main components made in heavy duty anti-corrosive 304 type stainless steel: internal chamber, external, front and side panels, pre-wash arms and rack transportation system.
The unit is built on modularity concept to easily connect with dual rinse rack type dishwasher without any modification including power, inlet water, drain water, detergent and rinse aid connections.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×