Modular Cooking Range Line thermaline 80 - 1 Zone Induction Wok, 1 Side (COD 588025)
Where to buy
Induction Cookers - Induction Woks

Modular Cooking Range Line
thermaline 80 - 1 Zone Induction Wok, 1 Side

COD 588025

Induction Wok, 1 zone, one-side operated

Specifications

  • Supply voltage: 400 V/3N ph/50/60 Hz

    Electrical power max.: 5 kW

  • Current consumption: 7.5 Amps

  • Configuration: One-Side Operated;Top

    Back Plates Power: 5 - kW

    Back Plates dimensions: Ø 300

    External dimensions, Width: 500 mm

    External dimensions, Depth: 800 mm

    External dimensions, Height: 250 mm

    Net weight: 15 kg

Product Features

Fast deployment with full heating power immediately.
Low heat dissipation to the kitchen.
Overheat protection: a temperature sensor switches off the supply in case of overheating.
Power to the zone can be set with progressive output i.e. fine regulation at the lower levels and larger progress at the upper levels.
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
IPX5 water resistance certification.
All major components may be easily accessed from the front.
Induction wok glass ceramic cooking surface 340 mm in diameter.
THERMODUL connection system creates a seamless work top when units are connected to each other thus avoiding soil penetrating vital components and facilitating the removal of units in case of replacement or service.
Metal knobs with embedded hygienic silicon "soft" grip for easier handling and cleaning. The special design of the controls prevent infiltration of liquids or soil into vital components.
Large visible digital display manufactured in tempered glass to resist heat and chemicals, showing temperatures or power settings. The display also shows on/off status of the appliance and on/off status of the heating elements.
2 mm top in 1.4301 (AISI 304).
Unit constructed according to DIN 18860_2 with 20 mm drop nose top and 70 mm recessed plinth.
Flat surface construction with minimal hidden areas to easily clean all surfaces
Internal frame for heavy duty sturdiness in 1.4301 (AISI 304).
Unit constructed according to DIN 18860_2 with 20 mm drop nose top.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×