Main Features
Scrapers with smooth and ribbed blades included as standard.
Temperature range from 90° up to 270°C.
Rough brushed chrome surface is highly resistant to scratches and facilitates cleaning operations at the end of the day.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Rough brushed chrome surface is highly resistant to scratches and facilitates cleaning operations at the end of the day.
Suitable for countertop installation.
Piezo spark ignition with thermostatic valve for added safety.
Units have separate controls for each half module of the cooking surface.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Large drain hole on cooking surface permits the draining of fat into large 1,5 liter collector placed under the cooking surface.
Stainless steel high splash guards on the rear and sides of cooking surface. Splash guards can be easily removed for cleaning and are dishwasher-safe.
Piezo spark ignition with thermostatic valve for added safety.
Units have separate controls for each half module of the cooking surface.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Construction
Cooking surface 15mm thick brushed chrome for optimum grilling results and ease of use.
Cooking surface 2/3 smooth and 1/3 ribbed.
AISI 304 stainless steel worktop, 2mm thick.
Cooking surface 15mm thick brushed chrome for optimum grilling results and ease of use.
Q Mark model delivered with nozzles for G30-50 mbar.
Unit is 930 mm deep to give a larger working surface area.
Q Mark model delivered with nozzles for G30-50 mbar.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
AISI 304 stainless steel worktop, 2mm thick.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
