Main Features
Equipped with forced air circulation system for rapid cooling and temperature distribution within the cell.
Digital control panel.
Anti-tilt runners accept GN 1/1 containers.
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Adjustable temperature range from -15°C to -22°C.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.
Frontal and easy access to all components in the cooling unit.
Self closing stainless steel doors (< 90°).
Certified safety CE requirements.
Small footprint to fit even in limited environments.
Tropicalized unit.
Digital control panel with temperature display.
Freezer compartment designed to accept GN1/1 containers.
Sustainability
Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).
Hot gas automatic evaporation of defrost water.
Removable triple-chamber balloon magnetic gasket to improve insulation and reduce energy consumption and ease of cleaning.
CFC and HCFC free, highly ecological refrigerant type: R290 (ecological gas in foam: cyclopentane). Hydrocarbon refrigerant gas R290 for the lowest environmental impact (GWP=3), to reduce green house and ozone depletion effects.
User Interface & Data Management
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Easy serviceability thanks to the intuitive control panel with access via app.
Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Construction
Pre-arranged for drain-pipe.
Anti-drip profile on stainless steel worktop edge.
Worktop in AISI 304 Stainless steel with a 50 mm profile.
Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.
External bottom panel in stainless steel.
Fault code display.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
Built-in refrigeration unit.
3 compartments with 3 doors.
Interior base with rounded corners, pressed from a single sheet.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
Excellent space optimisation thanks to the compact dimensions.
Extractable cooling unit to facilitate maintenance.
IP21 protection index.
Built-in compressor to suit operating conditions.
Access to all components from the front.
