Main Features
Small footprint to fit even in limited environments.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Hot gas automatic evaporation of defrost water.
Refrigerated compartment designed to accept GN 1/1 containers.
Digital control panel.
Combination of doors and drawers to suit varying needs, with the possibility to change the configuration on site.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.
Self closing stainless steel doors (< 90°).
Frontal and easy access to all components in the cooling unit.
Forced air circulation for rapid cooling and an even temperature distribution.
Certified safety CE requirements.
Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Anti-tilt runners accept GN 1/1 containers.
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
Equipped with forced air circulation system for rapid cooling and temperature distribution within the cell.
Digital white-digit display with internal temperature display and setting, manual activation of defrost cycle and turbo frost cycle (to rapidly cool warm loads).
Easy serviceability thanks to the intuitive control panel with access via app.
Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Tropicalized unit.
Adjustable temperature range from -2 °C to +10 °C to suit meat, fish and dairy storage requirements.
Automatic evaporation of defrost water.
Sustainability
Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).
Removable triple-chamber balloon magnetic gasket to improve insulation and reduce energy consumption and ease of cleaning.
Construction
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
Access to all components from the front.
Fault code display.
Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.
Built-in compressor to suit operating conditions.
Internal and external doors, front, back and side panels in AISI 304 Stainless steel.
Rounded internal corners for ease of cleaning.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Excellent space optimisation thanks to the compact dimensions.
External back panel in galvanized steel.
Internal dimension of the drawers.
• models with 2 1/2 drawers: 1st drawer (top drawer) 203x302x521 / 2nd drawer 223x302x521 (HxWxD)
• models with 3 1/3 drawers: 1st drawer (top drawer) 98x302x521 / 2nd and 3rd drawers 118x302x521 (HxWxD)
• models with 1/3+2/3 drawers: 1st drawer (top drawer) 98x302x521 / 2nd drawer 333x302x521 (HxWxD)
Built-in refrigeration unit.
IP21 protection index.
External bottom panel in stainless steel.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.
Pre-arranged for drain-pipe.
Extractable cooling unit to facilitate maintenance.
Interior base with rounded corners, pressed from a single sheet.
Mounted on 150 mm adjustable feet.
304 AISI stainless steel internal and external doors, front and side panels. Evaporator in aluminium.
High-density expanded polyurethane foam 50 mm in thickness with cyclopenthane injection.
