Forced air circulation for rapid cooling and an even temperature distribution.
Equipped with forced air circulation system for rapid cooling and temperature distribution within the cell.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Certified safety CE requirements.
Frontal and easy access to all components in the cooling unit.
Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.
Hot gas automatic evaporation of defrost water.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Adjustable temperature range from -15 °C to -22 °C to suit meat, fish and dairy storage requirements.
Self closing stainless steel doors (< 90°).
Digital control panel with temperature display.
Freezer compartment designed to accept GN1/1 containers.
Combination of doors and drawers to suit varying needs, with the possibility to change the configuration on site.
Anti-tilt runners accept GN 1/1 containers.
Digital white-digit display with internal temperature display and setting, manual activation of defrost cycle and turbo frost cycle (to rapidly cool warm loads).
Easy serviceability thanks to the intuitive control panel with access via app.
Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Tropicalized unit.
Extractable cooling unit to facilitate maintenance.
Internal dimension of the drawers.
• models with 2 1/2 drawers: 1st drawer (top drawer) 203x302x521 / 2nd drawer 223x302x521 (HxWxD)
• models with 3 1/3 drawers: 1st drawer (top drawer) 98x302x521 / 2nd and 3rd drawers 118x302x521 (HxWxD)
• models with 1/3+2/3 drawers: 1st drawer (top drawer) 98x302x521 / 2nd drawer 333x302x521 (HxWxD)
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.
Interior base with rounded corners, pressed from a single sheet.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
Built-in compressor to suit operating conditions.
External bottom panel in stainless steel.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Access to all components from the front.
Anti-drip profile on stainless steel worktop edge.
Excellent space optimisation thanks to the compact dimensions.
External back panel in galvanized steel.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
Pre-arranged for drain-pipe.
Built-in refrigeration unit.
Fault code display.
Worktop in AISI 304 Stainless steel with a 50 mm profile.
Full stainless steel construction. Internal structure and worktop in AISI 304 Stainless steel.
Rounded internal corners for ease of cleaning.
