Electrolux Professional
Warewashing green&clean multi-rinse Rack Type,Energy Saving Device,ZERO LIME,medium dryer,electric,200r/h,L>R (COD 535053)
Where to buy
Warewashinggreen&clean multi-rinse Rack Type,Energy Saving Device,ZERO LIME,medium dryer,electric,200r/h,L>R
Multi Rinse Rack Type dishwashers - 200 racks per hour - with Dryer

Warewashing
green&clean multi-rinse Rack Type,Energy Saving Device,ZERO LIME,medium dryer,electric,200r/h,L>R

COD 535053

Multi Rinse Rack Type Dishwasher, 200 racks/hour, medium prewash&dryer, electric, Left>Right, Energy Saving Device, constant rinse, self cleaning, ZERO LIME Device, CLEAR BLUE Filtering System, WASH-SAFE CONTROL, touch screen, variable speeds, insulated d

Where to buy
Register your product

Specifications

  • Air humidity (top, exit): 100 / 100 % r.h.

    Latent heat: 6900 W

    Sensible heat: 4700 W

    Air flow (top, exit): 86 / 15 m³/h

    Air temperature: 27 - 45 °C

    The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.

    This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".

  • When the machine runs at DIN 10510 compliant speed.

    At average working conditions.

    Supply voltage: 380-415 V/3N ph/50 Hz

    Energy consumption: 29.6 kWh

    Wash tank heating elements: 14 kW

    Triple tank heating elements: 7 kW

    Default Installed Power: 34.1 kW

    Boiler heating elements: 5 kW

    Electrical power, min: 27.1 kW

    Wash pump size: 1.5 kW

    Rinse pump size (final, duo, triple): 0.55 / 0.32 / 0.32 kW

  • The higher the temperature, the faster the warm-up.
    Recommended temperature: 50°C.

    When below 7°fH/4°dH special detergent and rinse aid are needed.

    Inlet water line size: G 3/4"

    Inlet cold water line size: G 3/4"

    Drain line size: 50mm

    Inlet water supply pressure: 1.5-6 bar

    Inlet water supply temperature (wash and rinse): 5 - 65°C

    Inlet water supply temperature (rinse and pre-wash): 5 - 30 °C

    Inlet water supply hardness: 0 °fH / 0°dH

    Flow rate of wash pump: 500 l/h

    Peak rate of drain flow: 1.8 l/s

    Wash tank size: 70 l

    Duo rinse tank size: 20 l

    Triple rinse tank size: 20 l

    Rinse water consumption:

  • For transportation purpose only, the depth can be reduced to 795mm by removing the control box and the door handles.

    Reference norm used to measure the noise: IEC60335-2-58 annex AA.

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Productivity per hour (max. speed): 200 racks/3600dishes

    External dimensions, Width: 3200 mm

    External dimensions, Depth: 895 mm

    Productivity per hour (DIN compliant speed): 148 racks/2664 dishes

    External dimensions, Height: 2020 mm

    Charging hole size (height): 490 mm

    Productivity per hour (NSF compliant speed): 130 racks/2340 dishes

    Wash Temperature: 55 - 65 °C

    Duo rinse temperature: 75-80 °C

    Net weight: 590 kg

    Shipping weight: 651 kg

    Final rinse temperature: 85 °C

    Shipping height: 2200 mm

    Shipping width: 1040 mm

    Shipping depth: 3990 mm

    Shipping volume: 9.13 m³

    Table to table distance: 3200 mm

    Triple rinse temperature: 70 - 75 °C

  • Noise level: <62 dBA

    Rinse water consumption at max. speed: 80 l/h

Product Features

Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.
Automatic back-up mode is activated when a failure occurs. Guided troubleshooting for fast fixes including 300 precises notifications and 23 easy-to-follow processes.
Maximum Water Contact (MWC) wash arms are positioned along the full length of the wash tank.
Maximum capacity per hour of 200 racks easy to switch to DIN 10510 or NSF ANSI 3 compliant speed.
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
Splashhood at the entrance avoids water spilling outside the machine.
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
Automatic drain, clean and sanitize cycles featured as standard. The internal chambers, including the internal doors are completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
Multi-rinse arms in combination with double rinse tanks re-use final rinsing water in several phases to ensure hygiene and complete detergent removal on the washed wares.
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Drying zone removes most of water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely.
Adjustable feet for full access underneath the machine for cleaning.
Large counter balanced inspection doors allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
Self-draining wash pumps provide maximum hygiene and all wash and rinse zones drain automatically at the push of a button.
CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.
Built-in WASH-SAFE CONTROL system raises water temperature to 85°C to sanitize the rinse water. No external boiler is required. Built-in air break and rinse booster pump ensure constant temperature and pressure throughout the rinsing cycle regardless of the inlet water condition.
Three conveyor speeds can be selected through the control panel by the operator and customized on site.
Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.
The unit is built on modularity concept for easy to add pre-wash, wash and up to 2 dryer modules onsite.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.
Table-to-table length, 2900mm.

Included Accessories

Image
Quantity
Code
Description
Quantity: 1
Code: 535038
Medium drying zone with door for green&clean Multi Rinse Rack Type Dishwasher
Quantity: 1
Code: 865280
Kit splash hood for rack type with ESD
Quantity: 1
Code: 865282
Kit delime for rack type

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×