Specifications
-
Air Emission
Air temperature: 0 °C
Air humidity (entrance, exit): 0 / 0 % r.h.
Latent heat: 0 W
Sensible heat: 0 W
Air flow (entrance, exit): 0 / 0 m³/h
The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".
-
Electric
When the machine is run at DIN 10510 compliant speed.
Pre-wash tank heating element are activated only during sanitation cycle.
Wash pump size:
Supply voltage:
Pre-wash tank heating elements:
Default Installed Power: 0 kW
Boiler heating elements:
Pre-wash pump size:
Electrical power, min: 0 kW
Wash tank heating elements:
-
Water
Inlet cold water line size: G 3/4"
Inlet water supply temperature, pre-wash: 10-30°C
When below 7°fH/4°dH special detergent and rinse aid are needed.
Peak rate of drain flow: 2.5 l/s
Pre-wash tank size: 35 l
Wash tank size: 70 l
Inlet hot water line size:
Drain line size:
Inlet water supply pressure: 0-0 bar
Inlet water supply temperature (wash and rinse): 0 - 0°C
Inlet water supply hardness:
Rinse water consumption: 0 l/h
-
Key Information
For transportation purpose only, the depth can be reduced to either 895mm by removing the main switch button or 797mm by removing the control box and the door handle.
Reference norm used to measure the noise: IEC60335-2-58 annex AA.
Height with door open: 0 mm
Charging hole size (width): 0 mm
Rinse temperature: 0 °C
Productivity per hour (max. speed):
Productivity per hour (medium speed): 0 racks/0 dishes
External dimensions, Width:
External dimensions, Depth:
External dimensions, Height:
Productivity per hour (DIN compliant speed): 0 racks/0 dishes
Charging hole size (height): 0 mm
Table to table distance: 0 mm
Pre-wash temperature: 0-0°C
Wash temperature: 0 - 0 °C
-
Sustainability
Noise level:
Rinse water consumption at max speed: 0 l/rack
Product Features
Detergents and Chemicals (not included)