Modular Cooking Range Line 900XP 8-Burner Gas Range on 2 Gas Ovens (COD 391272)
Where to buy
Gas Ranges

Modular Cooking Range Line
900XP 8-Burner Gas Range on 2 Gas Ovens

COD 391272

8-Burner (2x10 kW, 6x6 kW) gas Range on 2 gas Oven (8,5 kW each) - AGA - Aus

Specifications

  • Gas Power: 73 kW

    Standard gas delivery: Natural Gas

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 1/2"

  • Oven working Temperature: 120 °C MIN; 280 °C MAX

    Oven Cavity Dimensions (width): 575 mm

    Oven Cavity Dimensions (height): 300 mm

    Oven Cavity Dimensions (depth): 700 mm

    Net weight: 300 kg

    Shipping weight: 350 kg

    Shipping height: 1030 mm

    Shipping width: 1780 mm

    Shipping depth: 1020 mm

    Shipping volume: 1.87 m³

    Front Burners Power: 6 - 6 kW

    Back Burners Power: 10 - 10 kW

    Certification group: N9CG

    Back Burners Dimension - mm Ø 100 Ø 100

    Front Burners Dimension - mm Ø 60 Ø 60

Product Features

Main Features

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPX5 water protection.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
The special design of the control knob system guarantees against water infiltration.
The six 6 kW and two 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers: - 60 mm burners with power regulation from 1,5 to 6 kW - 100 mm burners with power regulation from 2.2 kW to 10 kW
Base compartment consists of two gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed cast iron base plate.
40 mm thick oven door for heat insulation.
Burners with optimized combustion.
Oven thermostat adjustable from 120 °C to 280 °C.
Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.
Control knobs provide smooth, continuous rotation from min to max power level.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPX5 water protection.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Protected pilot light.
The special design of the control knob system guarantees against water infiltration.
Base compartment consists of two gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed cast iron base plate.
Burners with optimized combustion.
Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.
Oven thermostat adjustable from 120 °C to 280 °C.
40 mm thick oven door for heat insulation.
The six 6 kW and two 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers: - 60 mm burners with power regulation from 1,5 to 6 kW - 100 mm burners with power regulation from 2.2 kW to 10 kW

Construction

All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
AISI 304 stainless steel worktop, 2mm thick.
Unit is 930 mm deep to give a larger working surface area.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
AISI 304 stainless steel worktop, 2mm thick.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Unit is 930 mm deep to give a larger working surface area.

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×