Main Features
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPX5 water protection.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
The special design of the control knob system guarantees against water infiltration.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Burners with optimized combustion.
The six 10 kW high efficiency burners are available in 100 mm diameter with power regulation from 2.2 kW to 10 kW.
Suitable for countertop installation.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The six 10 kW high efficiency burners are available in 100 mm diameter with power regulation from 2.2 kW to 10 kW.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Construction
AISI 304 stainless steel worktop, 3mm thick.
Electric ignition.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Unit is 930 mm deep to give a larger working surface area.
Electric ignition.
AISI 304 stainless steel worktop, 3mm thick.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
