Main Features
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
All major compartments located in front of unit for ease of maintenance.
Deep drawn V-Shaped wells.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Piezo spark ignition for added safety.
The special design of the control knob system guarantees against water infiltration.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
Thermostatic regulation of oil temperature up to a maximum of 190 °C.
Oil drains through a tap into a drainage container positioned under the well.
High efficiency 28 kW burners in stainless steel with flame failure device attached to the outside of the well.
Supplied as standard with 2 baskets and 1 right and left side doors for cupboard.
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Deep drawn V-Shaped wells.
High efficiency 28 kW burners in stainless steel with flame failure device attached to the outside of the well.
Thermostatic regulation of oil temperature up to a maximum of 190 °C.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Oil drains through a tap into a drainage container positioned under the well.
All major compartments located in front of unit for ease of maintenance.
Piezo spark ignition for added safety.
The special design of the control knob system guarantees against water infiltration.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
Supplied as standard with 2 baskets and 1 right and left side doors for cupboard.
Construction
Interior of well with rounded corners for ease of cleaning.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
IPX5 water resistance certification.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Unit is 930 mm deep to give a larger working surface area.
Interior of well with rounded corners for ease of cleaning.
Unit is 930 mm deep to give a larger working surface area.
IPX5 water resistance certification.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.