Main Features
Deep drawn V-Shaped well.
Flame failure device on each burner.
All major compartments located in front of unit for ease of maintenance.
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Overheat protection thermostat as standard on all units.
Piezo spark ignition for added safety.
The special design of the control knob system guarantees against water infiltration.
High efficiency 21 kW burners in stainless steel with flame failure device attached to the outside of the well.
Thermostatic regulation of oil temperature up to a maximum of 190 °C.
Supplied as standard with 2 half size baskets and 1 right side door for cupboard.
All major compartments located in front of unit for ease of maintenance.
Deep drawn V-Shaped well.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Piezo spark ignition for added safety.
The special design of the control knob system guarantees against water infiltration.
Thermostatic regulation of oil temperature up to a maximum of 190 °C.
Supplied as standard with 2 half size baskets and 1 right side door for cupboard.
High efficiency 21 kW burners in stainless steel with flame failure device attached to the outside of the well.
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Construction
Unit is 930 mm deep to give a larger working surface area.
Interior of well with rounded corners for ease of cleaning.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
IPX5 water resistance certification.
Unit delivered with four 50 mm legs in stainless steel as standard.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Interior of well with rounded corners for ease of cleaning.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
IPX5 water resistance certification.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Unit is 930 mm deep to give a larger working surface area.
Unit delivered with four 50 mm legs in stainless steel as standard.
Q Mark model delivered with nozzles for G30-50 mbar.
Q Mark model delivered with nozzles for G30-50 mbar.