Main Features
Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
Almost the entire surface of the ceramic plate can be used without “dead” spots.
Indicating lamp for each zone located on control console.
Induction plates endowed with overheating safety device.
IPx4 water protection.
Low heat dissipation to the kitchen.
Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
6mm glass ceramic cooking surface with 4 independently controlled induction zones with a power of 3.5 kW per zone.
Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
Suitable for countertop installation.
Suitable for countertop installation.
6mm glass ceramic cooking surface with 4 independently controlled induction zones with a power of 3.5 kW per zone.
Almost the entire surface of the ceramic plate can be used without “dead” spots.
Indicating lamp for each zone located on control console.
Induction plates endowed with overheating safety device.
Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
Low heat dissipation to the kitchen.
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
IPx4 water protection.
Sustainability
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
This model is compliant with Swiss Energy Efficiency Ordinance (730.02).
This model is compliant with Swiss Energy Efficiency Ordinance (730.02).
Construction
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
This model is compliant with Swiss Energy Efficiency Ordinance (730.02).
One piece pressed 1.5 mm work top in Stainless steel.
All exterior panels in Stainless Steel with Scotch Brite finishing.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
