Main Features
Heating elements tilt 90° for easy cleaning.
Removable 2mm thick steel U-shaped grids in AISI 441 stainless steel for fast heating of cooking surface.
Top configuration can be installed on refrigerated / freezer base with limited layout options.
Top configuration allows installation on ambient base.
Led warning indicator to give an alarm when well is empty.
Incoloy armoured heating elements positioned under the cooking grid.
Incoloy armoured heating elements positioned under the cooking grid.
Power indicator light.
Each bank of elements has an independent power regulation through a control knob.
Power indicator light.
Each bank of elements has an independent power regulation through a control knob.
Heating elements tilt 90° for easy cleaning.
Removable 2mm thick steel U-shaped grids in AISI 441 stainless steel for fast heating of cooking surface.
Fixed well with drain to collect residual cooking juices and grease.
Fixed well with drain to collect residual cooking juices and grease.
Large drain protected by overflow and filter.
Large drain protected by overflow and filter.
Water must be added to well before operation.
Water must be added to well before operation.
Water filling tap with knob control.
Water filling tap with knob control.
Removable stainless steel deflectors to recuperate heat and reduce cooking time.
Removable stainless steel deflectors to recuperate heat and reduce cooking time.
Stainless steel splash guards on sides of cooking surface. Splash guards can be easily removed for cleaning.
Stainless steel splash guards on sides of cooking surface. Splash guards can be easily removed for cleaning.
Led warning indicator to give an alarm when well is empty.
Top configuration allows installation on ambient base.
Top configuration can be installed on refrigerated / freezer base with limited layout options.
Construction
One piece pressed 1.5 mm work top in Stainless steel.
Unit is 730mm deep to give a larger working surface area
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
One piece pressed 1.5 mm work top in Stainless steel.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Unit is 730mm deep to give a larger working surface area
