Main Features
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
All major compartments located in front of unit for ease of maintenance.
Deep drawn V-Shaped wells.
Flame failure device on each burner.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPx4 water protection.
Overheat protection thermostat as standard on all units.
Piezo spark ignition for added safety.
Thermostatic regulation of oil temperature up to a maximum of 185 °C.
Two high efficiency 7 kW burners in stainless steel with flame failure device attached to the outside of the well.
Unit to be mounted on 50mm height adjustable feet in stainless steel.
Oil drains through a tap into a drainage container positioned under the well.
Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Unit to be mounted on 50mm height adjustable feet in stainless steel.
Deep drawn V-Shaped wells.
Two high efficiency 7 kW burners in stainless steel with flame failure device attached to the outside of the well.
Thermostatic regulation of oil temperature up to a maximum of 185 °C.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Oil drains through a tap into a drainage container positioned under the well.
All major compartments located in front of unit for ease of maintenance.
Piezo spark ignition for added safety.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPx4 water protection.
Construction
Interior of well with rounded corners for ease of cleaning.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
One piece pressed 1.5 mm work top in Stainless steel.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Q Mark model delivered with nozzles for G30-50 mbar.
Q Mark model delivered with nozzles for G30-50 mbar.
Interior of well with rounded corners for ease of cleaning.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
