Anti-tilt runners accept GN 1/1 containers.
Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Small footprint to fit even in limited environments.
Certified safety CE requirements.
Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.
Frontal and easy access to all components in the cooling unit.
Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
Hot gas automatic evaporation of defrost water.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Adjustable temperature range from -15°C to -22°C.
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Self closing stainless steel doors (< 90°).
Combination of doors and drawers to suit varying needs, with the possibility to change the configuration on site.
Refrigerated compartment designed to accept GN 1/1 containers.
Digital control panel.
Forced air circulation for rapid cooling and an even temperature distribution.
Easy serviceability thanks to the intuitive control panel with access via app.
Integrated RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Interior base with rounded corners, pressed from a single sheet.
Internal and external doors, front, back and side panels in AISI 304 Stainless steel.
Fault code display.
Mounted on Stainless steel adjustable legs to give 150 mm clearance for ease of cleaning.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Rounded internal corners for ease of cleaning.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
Extractable cooling unit to facilitate maintenance.
IP21 protection index.
Built-in compressor to suit operating conditions.
Access to all components from the front.
Built-in refrigeration unit.
Pre-arranged for drain-pipe.
