Dual Rinse Rack Type dishwashers - 150 racks per hour
green&clean dual rinse rack type dishwasher with Energy Saving Device, 150racks/hour, electric,50Hz
Dual rinse rack type dishwasher, 150 racks/hour, Energy Saving Device, ZERO LIME Device, CLEAR BLUE Filtering System, WASH-SAFE CONTROL, electric, touch screen, customized direction on-site
Supply voltage: 380-415 V/3N ph/50 Hz
Default Installed Power: 26.5 kW
Electrical power min: 16.5 kW
When the machine is run at DIN 10510 compliant speed.
Boiler heating elements: 14 kW
Wash pump size: 1.5kW
Wash tank heating elements: 10 kW
Inlet hot water line size: G 3/4"
Inlet cold water line size: G 3/4"
Drain line size: 50mm
Inlet water supply pressure: 1.5-6 bar
Inlet Water Supply temperature (rinse): 10-30°C
Inlet water supply temperature (wash): 50 - 65 °C
Inlet water supply hardness: 14 °fH / 8°dH
When below 7°fH/4°dH special detergent and rinse aid are needed.
Peak rate of drain flow: 2.5 l/s
Wash tank size: 70 l
Productivity per hour (max. speed): 150 racks/2700dishes
Productivity per hour (medium speed): 114 racks/2052 dishes
Productivity per hour (DIN compliant speed): 82 racks/1476 dishes
Wash Temperature: 55 - 65 °C
Final rinse temperature: 85 °C
External dimensions, Width: 1520 mm
External dimensions, Depth: 925 mm
For transportation purpose only, the depth can be reduced to either 895mm by removing the main switch button or 797mm by removing the control box and the door handle.
External dimensions, Height: 1908 mm
Height with door open: 2095 mm
Charging hole size (width): 530 mm
Charging hole size (height): 490 mm
Shipping height: 2070 mm
Shipping width: 1010 mm
Shipping depth: 1260 mm
Shipping volume: 2.63 m³
Reference norm used to measure the noise: IEC60335-2-58 annex AA.
Table to table distance: 1120 mm
Rinse water consumption at max speed (l/rack): 1.2 l/rack
Rinse water consumption at max speed (l/h) 180 l/h
Noise level: <62 dBA
Air flow (top, exit): 565 / 0 m³/h
Air temperature (top, exit): 27 °C
Air humidity (top, exit): 100 / 0 % r.h.
The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.
Latent heat: 5000 W
Sensible heat: 2100 W
This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".