Modular Cooking Range Line Pasta Cooker, gas, 2 well, 10.5gal (COD 391202)
Where to buy
Pasta Cooker - Manual - Gas

Modular Cooking Range Line
Pasta Cooker, gas, 2 well, 10.5gal

COD 391202

Pasta Cooker, gas, Pair of 10.5 gallon (40 Lt) tanks, 66lb/hour capacity each, automatic starch removal, automatic low water level controls, 9 position energy controls, 316 stainless steel tanks, stainless steel cabinet & legs, 106,000 BTU

Specifications

  • Supply voltage: 208/120 V/1 ph/60 Hz

    Convertible to: 120V/1Ph/60Hz

    Rated amps: 0.3A (0.6A/120V)

    Total Watts: 0 kW

  • Gas Power: 31 kW

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 3/4"

    Natural gas - Pressure: 4" w.c. (10 mbar)

    LPG Gas Pressure: 10" w.c. (25 mbar)

  • Drain "D": 1"

    Incoming Cold/hot Water line size: 3/4"

    Total hardness: 5-50 ppm

  • Usable well dimensions (width): 300 mm

    Usable well dimensions (height): 260 mm

    Usable well dimensions (depth): 520 mm

    Well Capacity (MAX): 40 lt MAX

    Net weight: 115 kg

    Shipping weight: 108 kg

    Shipping height: 1120 mm

    Shipping width: 1020 mm

    Shipping depth: 860 mm

    Shipping volume: 1 m³

    Certification group:

Product Features

In addition to cooking pasta, the appliance can be used for noodles of every kind, rice, dumplings and vegetables.
High efficiency 32 kW burners in stainless steel with flame failure device and power settings for each well, located below the well.
Water basin in 316-L type Stainless steel.
Water basin is seamlessly welded into the top of the appliance.
Provided with integrated drip zone on which baskets can be placed for draining purposes.
Automatic starch removal function during cooking: improved water quality over time.
Automatic low-water level shut-off: no accidental over-heating.
Easy-to-use control panel with gas cock and piezo ignition.
All major compartments located in front of unit for ease of maintenance.
Continuous water filling regulated through a manual water tap.
Large drain with manual ball-valve for fast emptying of well.
Thermocouple device for added safety.
IPX5 water resistance certification.
The special design of the control knob system guarantees against water infiltration.
One piece pressed 0.07" (2mm) work top in Stainless Steel.
10.5gal (40lt) water basins.
Unit delivered with four 2" (50mm) legs in stainless steel as standard (all round Stainless steel kick plates as option).
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×