Modular Cooking Range LinePasta Cooker, electric, 10.5gal (COD 391203)
Where to buy
Pasta Cooker - Manual - Electric

Modular Cooking Range Line
Pasta Cooker, electric, 10.5gal

COD 391203

Pasta Cooker, electric, Single 10.5 gallon (40Lt) tank, 66lb/hour capacity each, automatic starch removal, automatic low water level control, 9 position energy control, 316 stainless steel tank, stainless steel cabinet & legs


  • Supply voltage: 208 V/3 ph/50/60 Hz

    Rated amps: 28 A

    Electrical power, max: 10 kW

    Total Watts: 10 kW

  • Drain "D": 1"

    Incoming Cold/hot Water line size: 3/4"

    Total hardness: 5-50 ppm

  • Usable well dimensions (width): 11 13/16" (300 mm)

    Usable well dimensions (depth): 20 1/2" (520 mm)

    Usable well dimensions (height): 10 1/4" (260 mm)

    Well Capacity (MAX): 10.57 gal (40 litres) MAX

    Net weight: 97 lbs (44 kg)

    Shipping width: 18 1/8" (460 mm)

    Shipping depth: 40 3/16" (1020 mm)

    Shipping height: 44 1/16" (1120 mm)

    Shipping weight: 143 lbs (65 kg)

    Shipping volume: 18.56 ft³ (0.53 m³)

    Certification group:

Product Features

In addition to cooking pasta, the appliance can be used for noodles of every kind, rice, dumplings and vegetables.
Unit to have infared heating system positioned beneath the base of the well.
Water basin in 316-L type Stainless steel.
Water basin is seamlessly welded into the top of the appliance.
Provided with integrated drip zone on which baskets can be placed for draining purposes.
10.5gal (40 liters) water basin.
Automatic starch removal function during cooking: improved water quality over time.
Automatic low-water level shut-off: no accidental over-heating.
Easy-to-use control panel.
Continuous water filling regulated through a manual water tap.
Large drain with manual ball-valve for fast emptying of well.
All major compartments located in front of unit for ease of maintenance.
IPX5 water resistance certification.
The special design of the control knob system guarantees against water infiltration.
One piece pressed 0.07" (2mm) work top in Stainless Steel.
Unit delivered with four 2" (50mm) legs in stainless steel as standard (all round Stainless steel kick plates as option).
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now