Warewashing hygiene&clean Undercounter, atm boiler, double skin,water soft,drain p,det&rinse aid disp,DIN10512 and A0 60 compliant (COD 502724)
Where to buy
green&clean Undercounter - DIN 10512 & A0 60

Warewashing
hygiene&clean Undercounter, atm boiler, double skin,water soft,drain p,det&rinse aid disp,DIN10512 and A0 60 compliant

COD 502724

hygiene&clean Undercounter Dishwasher with atmospheric boiler, double skin, built-in continuous water softener, drain pump, detergent and rinse aid dispensers, complies with DIN 10512 and EN 15883-1 standards reaching A0 60 disinfection level, 3 phase, 40B/H or 480D/H

Specifications

  • Supply voltage: 400 V/3N ph/50 Hz

    Convertible to: 230V 3~; 230V 1N~

    Default Installed Power: 6.85 kW

    Boiler heating elements: 6 kW

    Tank heating elements: 2 kW

    Wash pump size: 0.736 kW

  • Pressure, bar min/max: 0.5-7 bar

    Drain line size: 20.5mm

    Inlet Water supply pressure: 7 - 102 psi (0.5 - 7 bar)

    Washing tank capacity (lt): 23

    Boiler Capacity (lt): 12

  • Water supply temperature*: 50 °C

    Water consumption per cycle (lt): 3

    Noise level: 61 dBA

  • Baskets per hour*: 40

    Dishes per hour: 480

    Working cycles time (sec.): 90/120/240

    Wash temperature: 71-77°C

    Cell dimensions - width: 500 mm

    Cell dimensions - depth: 500 mm

    Cell dimensions - height: 335 mm

    Rinse temperature: 90 °C

    External dimensions, Width: 600 mm

    External dimensions, Depth: 615 mm

    External dimensions, Height: 820 mm

    Packaging size

    (WxDxH): 600x612x850 mm

Product Features

An effective rinse system uses only 7,5 litres of clean hot water per basket for perfect sanitization.
Fully automatic self-cleaning cycle avoids the risk of bacteria proliferation.
Washing system endowed with rotating washing arms, high powered wash pump and large capacity boiler for professional washing.
Washing capacity of 12 baskets or 216 dishes per hour.
Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.
Three phase or single phase electrical connection, convertible on-site.
Simple control panel with digital display allows on-site personalization of washing and rinsing cycle times and temperatures as well as precise rinse aid and detergent quantities to suit customer's needs.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Simple service from the front.
Low noise level.
Slanted wash arms to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
IPx4 water protection.
Solid double skinned counter-balance door with hurt-free handle fully in stainless steel.
High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.
Front loading of regeneration salt: 2 resin containers alternate for non-stop washing.
4 second (variable) pause after washing and before rinsing ensures that no drops of unclean water will fall on the clean items at the end of the rinsing cycle.
Double skinned insulated wall ensures a low noise level and a reduction in heat loss from the machine.
Digital read-out keeps operator informed as to temperatures.
Designed to efficiently disinfect items thus fulfilling hospital requirements by guaranteeing a temperature of 90 °C during 30 seconds rinsing phase.
Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Built-in atmospheric boiler sized to raise incoming 50 °C water to 90 °C minimum for sanitizing rinse. No external booster is required.
Constant temperature of 90 °C thoughout the rinsing cycle regardless of the network's water pressure.
Incorporated Soft Start feature to offer additional protection to more delicate items.
Continuous water softener (CWS) to ensure complete and automatic regeneration of rinse water without pressure drop.
Large tank filter collects the soil to keep the wash water clean for a longer time and have better washing performance.
Completely closed on the back by a cover plate.
Front panel, door, wash tank, tank filters, wash arms and rinse arms made in heavy duty anti-corrosive 304 AISI stainless steel.
PVC water supply hose with metal connections resistant to high water pressure.
304 stainless steel boiler with higher welding protection to increase resistance to corrosion.
Unit to feature smooth surfaces to facilitate cleaning.
The boiler drain facilitates the evacuation of stagnant water after long periods of inactivity to ensure a higher level of hygiene.
Revolving Stainless steel wash/rinse arms above and below the basket.
Large deep drawn wash tank and internal wash area with round corners and no pipes to avoid dirt built-up.
Interchangeable wash/rinse arms screw out for simple clean up.
Incorporated drain pump to control water level in wash tank draining.
Element protection from dry fire and low water.

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×