Warewashing green&clean dual rinse rack type, Energy Saving Device,ZERO LIME,Wash-Safe Control 250r/h, elec-50Hz (COD 535106)
Where to buy
Dual Rinse Rack Type dishwashers - 250 racks per hour

Warewashing
green&clean dual rinse rack type, Energy Saving Device,ZERO LIME,Wash-Safe Control 250r/h, elec-50Hz

COD 535106

Dual rinse rack type dishwasher, 250 racks/hour, Energy Saving Device, ZERO LIME Device, CLEAR BLUE Filtering System, WASH-SAFE CONTROL, electric, touch screen, Right>Left

Specifications

  • Supply voltage: 380-415 V/3N ph/50 Hz

    Default Installed Power: 33 kW

    Electrical power min: 23 kW

    When the machine is run at DIN 10510 compliant speed.

    Pre-wash tank heating elements: 7 kW

    Pre-wash tank heating element are activated only during sanitation cycle.

    Boiler heating elements: 19 kW

    Wash pump size: 1.5kW

    Wash tank heating elements: 10 kW

  • Inlet hot water line size: G 3/4"

    Inlet cold water line size: G 3/4"

    Drain line size: 50mm

    Inlet water supply pressure: 1.5-6 bar

    Inlet water supply temperature (wash): 50 - 65 °C

    Inlet water supply hardness: 14 °fH / 8°dH

    When below 7°fH/4°dH special detergent and rinse aid are needed.

    Peak rate of drain flow: 2.5 l/s

    Pre-wash tank size: 70 l

    Water cold/hot pipe size G 3/4"

  • Productivity per hour (max. speed): 250 racks/4500dishes

    Productivity per hour (medium speed): 168 racks/3024 dishes

    Productivity per hour (DIN compliant speed): 115 racks/2070 dishes

    Wash Temperature: 55 - 65 °C

    Pre-wash temperature: 10-40°C

    Final rinse temperature: 85 °C

    External dimensions, Width: 2410 mm

    External dimensions, Depth: 925 mm

    For transportation purpose only, the depth can be reduced to either 895mm by removing the main switch button or 797mm by removing the control box and the door handle.

    External dimensions, Height: 1908 mm

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Charging hole size (height): 490 mm

    Shipping height: 2068 mm

    Shipping width: 1006 mm

    Shipping depth: 2142 mm

    Shipping volume: 4.46 m³

    Reference norm used to measure the noise: IEC60335-2-58 annex AA.

    Table to table distance: 2010 mm

  • Rinse water consumption at max speed (l/rack): 1 l/rack

    Rinse water consumption at max speed (l/h) 250 l/h

    Noise level: <62 dBA

  • Air flow (top, exit): 565 / 0 m³/h

    Air temperature (top, exit): 27 °C

    Air humidity (top, exit): 100 / 0 % r.h.

    The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.

    Latent heat: 5000 W

    Sensible heat: 3500 W

    This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".

Product Features

IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Maximum capacity per hour of 250 racks easy to switch to DIN 10510 compliant or other speed.
The unit is ready to be connected with OnE Connectivity for 24/7 real time monitoring, increasing equipment uptime, maximum profit and optimizing your process.
Three conveyor speeds can be selected through the control panel by the operator and customized on-site.
Automatic drain, clean and sanitize cycles featured as standard. The internal chamber, is completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
Large counter balanced inspection door allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.
Built-in WASH-SAFE CONTROL system raises water temperature to 85°C to sanitize the rinse water. No external boiler is required. Built-in air break and rinse booster pump ensure constant temperature and pressure throughout the rinsing cycle regardless of the inlet water condition.
CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
Adjustable feet for full access underneath the machine for cleaning.
Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.
Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×