Main Features
Unit to have stainless steel feet with height adjustment up to 50 mm.
Burners to feature flame regulator.
The four 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.
Double skinned door with pressed internal panel for heat insulation.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Pan supports in cast iron are washable in a dishwasher.
IPx4 water protection.
Burners to feature flame regulator.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Oven thermostat adjustable from 110 °C to 270 °C.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
Protected pilot light.
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and rib
The four 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.
Oven thermostat adjustable from 110 °C to 270 °C.
Unit to have stainless steel feet with height adjustment up to 50 mm.
Pan supports in cast iron are washable in a dishwasher.
Double skinned door with pressed internal panel for heat insulation.
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Stainless steel oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed enamelled steel base plate.
IPx4 water protection.
Construction
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
All exterior panels in Stainless Steel with Scotch Brite finishing.