Warewashing green&clean multi-rinse Rack Type Dishwasher, Energy Saving Device, electric, 200 r/h,right>left (COD 535070)

Compare Where to buy

Multi Rinse Rack Type dishwashers - 200 racks per hour

Warewashing
green&clean multi-rinse Rack Type Dishwasher, Energy Saving Device, electric, 200 r/h,right>left

COD 535070

Multi Rinse Rack Type Dishwasher, 200 racks/hour, electric, Right>Left, Energy Saving Device, medium pre-wash, constant rinse, self cleaning, CLEAR BLUE Filtering System, WASH-SAFE CONTROL, touch screen, variable speeds, insulated doors (Norway)

Compare

Where to buy

Product registration

Specifications

Electric

Supply voltage: 220-240 V/3 ph/50 Hz

Energy consumption: 25.2 kWh

Wash tank heating elements: 14 kW

Default Installed Power: 29.7 kW

Triple tank heating elements: 7 kW

Boiler heating elements: 5 kW

Electrical power min: 22.7 kW

Wash pump size: 1.5 kW

Rinse pump size (final, duo, triple): 0.55 / 0.32 / 0.32 kW
Water

Peak rate of drain flow (l/s): 1.8

Inlet water line size: G 3/4" G 3/4"

Inlet cold water line size: G 3/4"

Drain line size: 50mm

Inlet water supply pressure: 1.5-7 bar

Inlet Water Supply temperature (rinse): 5 - 30 °C

Inlet water supply temperature (wash and rinse): 5 - 65°C

Inlet water supply hardness: 5-8 °fH / 2.8-4.5°dH

Flow rate of wash pump: 500 l/min

Wash tank size: 70 l

Duo rinse tank size: 20 l

Triple rinse tank size: 20 l

Rinse water consumption: 0 l/rack
Key Information

Productivity per hour (max. speed): 200 racks/3600dishes

External dimensions, Width: 2640 mm

External dimensions, Depth: 895 mm

Productivity per hour (DIN compliant speed): 148 racks/2664dishes

External dimensions, Height: 1785 mm

Height with door open: 2095 mm

Charging hole size (width): 530 mm

Charging hole size (height): 490 mm

Productivity per hour (NSF compliant speed): 130 racks/2340dishes

Wash Temperature: 55 - 65 °C

Duo rinse temperature: 75-80 °C

Net weight: 500 kg

Shipping weight (gross): 569 kg

Final rinse temperature (min): 85 °C

Shipping height: 1970 mm

Shipping width: 1040 mm

Shipping depth: 3100 mm

Shipping volume: 6.35 m³

Table to table distance: 2640 mm

Triple rinse temperature: 70 - 75 °C
Air Emission

Air humidity (top, exit): 100 / 100 % r.h.

Latent heat: 6900 W

Sensible heat: 4700 W

Air flow (top, exit): 86 / 145 m³/h

Air temperature: 27 - 45 °C
Sustainability

Noise level: <62 dBA

Rinse water consumption at max. speed: 80 l/h

Documents

Product Features

Main Features

Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt build up provides fast drainage in only a few minutes. Pressed wash tank with no welded points offer a guaranteed water tight solution.

Large counter balanced inspection doors allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.

Self-draining wash pumps provide maximum hygiene and all wash and rinse zones drain automatically at the push of a button.

IP25 protection against water jets, solid objects and small animals (larger than 6 mm).

Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.

CLEAR BLUE filtering system removes soil from the wash water providing cleaner water and highly active detergent thus ensuring better washing performance and lower running costs.

Built-in WASH-SAFE CONTROL system raises water temperature to 85°C to sanitize the rinse water. No external boiler is required. Built-in air break and rinse booster pump ensure constant temperature and pressure throughout the rinsing cycle regardless of the inlet water condition.

Three conveyor speeds can be selected through the control panel by the operator and customized on site.

Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.

Multi-rinse arms in combination with double rinse tanks re-use final rinsing water in several phases to ensure hygiene and complete detergent removal on the washed wares.

Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.

Automatic drain, clean and sanitize cycles featured as standard. The internal chambers, including the internal doors are completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.

All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.

Splashhood at the entrance avoids water spilling outside the machine.

Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.

Maximum capacity per hour of 200 racks easy to switch to DIN 10510 or NSF ANSI 3 compliant speed.

Maximum Water Contact (MWC) wash arms are positioned along the full length of the wash tank.

Automatic back-up mode is activated when a failure occurs. Guided troubleshooting for fast fixes including 300 precises notifications and 23 easy-to-follow processes.

Sustainability

Built-in Energy Saving Device (ESD) utilizes the hot steam generated by the machine in the rinse and wash tanks to heat up incoming cold water up to 55°C before entering the boiler, thus saving energy.

Multi-rinse technology guarantees rinse water consumption of 0.4 liters/rack regardless of the conveyor speed to ensure low energy, water, detergent and rinse aid consumption.

Auto-start/stop equipped in different zones ensures that the zone runs only when a rack is passing through it. This reduces water, energy, chemical consumption and noise.

All chambers without internal pipes and therefore no hidden dirt traps.

Construction

Adjustable feet for full access underneath the machine for cleaning.

Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.

Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.

All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.

External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.

The unit is built on modularity concept for easy to add pre-wash, wash and up to 2 dryer modules onsite.

All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.

Table-to-table length, 2340mm.

Included Accessories

Image

Quantity

Code

Description

Quantity: 1

Code: 865280

Kit splash hood for rack type with ESD

Quantity: 1

Code: 922421

IoT module for OnE Connected (Combi Ovens, Blast chiller/freezers, Rack Type DW) and SkyDuo (one IoT board per appliance - to connect oven to blast chiller for Cook&Chill process).

Detergents and Chemicals (not included)

Image

Code

Description

Code: 0S2092

C11 Detergent for dishwashers; one pack of 2 cans of 5lt.

Code: 0S2093

C13 ECO Detergent for dishwashers; one pack of 2cans of 5lt.

Code: 0S2094

C12 Rinse aid for dishwashers; one pack of 2 cans of 5lt.

Code: 0S2281

C11 Detergent for dishwashers; 1 can of 20lt.

Code: 0S2362

C30 Multipurpose descaler; one pack of 2 cans of 5lt.

Code: 0S2904

C15 ECO Rinse aid for dishwashers; one pack of 2 cans of 5lt.

Complete the form below to request more information

Multi Rinse Rack Type dishwashers - 200 racks per hour