Main Features
Boilerless steaming function to add and retain moisture for high quality, consistent cooking results.
Dry hot convection cycle (max 300 °C) ideal for low humidity cooking. Automatic moistener (11 settings) for boiler-less steam generation.
EcoDelta cooking: cooking with food probe maintaining preset temperature difference between the core of the food and the cooking chamber.
Programs mode: a maximum of 100 recipes can be stored in the oven's memory, to recreate the exact same recipe at any time. 4-step cooking programs also available.
Fan with 5 speed levels from 300 to 1500 RPM and reverse rotation for optimal evenness. Fan stops in less than 5 seconds when door is opened.
Single sensor core temperature probe included.
Automatic fast cool down and pre-heat function.
SkyClean: Automatic and built-in self cleaning system. 5 automatic cycles (soft, medium, strong, extra strong, rinse-only).
Different chemical options available: solid (phosphate-free), liquid (requires optional accessory).
GreaseOut: predisposed for integrated grease drain and collection for safer operation (dedicated base as optional accessory).
Back-up mode with self-diagnosis is automatically activated if a failure occurs to avoid downtime.
Capacity: 10 GN 2/1 or 20 GN 1/1 trays.
OptiFlow air distribution system to achieve maximum performance in chilling/heating eveness and temperature control thanks to a special design of the chamber.
Sustainability
Auto-start/stop ensures that the zone runs only when a rack is passing through it. This reduces both water, energy consumption and noise.
CFC and HCFC free (ecological refrigerant type: R134a, - gas in foam: cyclopenthane).
CFC and HCFC-free insulation.
CFC, HCFC, HFC-free insulation.
Variable speed.
Interior LED light to save energy and for best internal visibility.
Built-in high efficiency Energy Saving Device (ESD) transfers the heat captured inside the machine to the incoming cold water before entering the boiler, thus saving energy; no ventilation hood is needed for the machine (depending on local regulation and conditional on compliance with VDI 2052).
CFC and HCFC free, highly ecological refrigerant type: R290 (ecological gas in foam: cyclopentane). Hydrocarbon refrigerant gas R290 for the lowest environmental impact (GWP=3), to reduce green house and ozone depletion effects.
CFC and HCFC free (highly ecological refrigerant type: R290).
Auto-start/stop equipped in different zones ensures that the zone runs only when a rack is passing through it. This reduces water, energy, chemical consumption and noise.
Extra insulation: 90mm body insulation to minimize energy dispersion.
All chambers without internal pipes and therefore no hidden dirt traps.
Maximum capacity per hour of 150 racks easy to switch to DIN 10510 or NSF ANSI 3 compliant speed.
Maximum Wash Contact (MWC) wash arms are positioned along the full length of the wash tank.
Top energy efficiency (class A) and granted uniformity even at extreme working conditions (class 5; 40°C and 40% humidity): unbeatable performance, certified by energy test protocol EN16825:2016.
Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).
Hydrocarbon refrigerant gas R290 for the lowest environmental impact (GWP=3) - CFC and HCFC free.
CFC and HCFC free (ecological refrigerant type: R600a).
Stainless steel feet 50 mm adjustable in height to align the operation height between the dishwasher and table as well as to ensure that tables drain back into the dishwasher.
The long roller conveyor is available in 600mm and from 1100mm up to 2600mm with 100mm-step length.
The mobile roller conveyor available form 1145mm (for 2 racks) up to 2645mm (for 5 racks) with 100mm-step length.
The short roller conveyor with deep basin is available from 800mm up to 1600mm with 100m-step length.
The short roller conveyor with deep basin is available from 800mm up to 1100mm with 100mm-step length
The short roller conveyor table is available from 1100mm up to 2600mm with 100mm-step length.
The short roller conveyor is available in 600mm length and from 1100mm up to 2600mm with 100mm-step length.
High efficiency components to minimize the energy consumption still guaranteeing the highest performances.
Built-in Energy Saving Device (ESD) captures the hot steam released on the sides of the machine to heat up incoming cold water before entering to the boiler, thus saving energy and reducing heat emission from the machine.
Low energy consumption thanks to high efficiency components, insulation and optimized airflow.
Variable speed compressor for better performance, lower energy consumption and lower noise level.
This model is compliant with Swiss Energy Efficiency Ordinance (730.02).
Low water consumption of 350liters/hour at maximum capacity, saves energy, water, detergent and rinse aid.
Simple operation through the user-friendly interface, and ergonomic design ensures minimal stress on the user. Colored touchpoints on removable components ensure fast cleaning operations.
User Interface & Data Management
All information related to the different operating models are recorded: date, time, cycle, core temperature, holding temperature, HACCP accordance.
Pictures upload for full customization of cycles.
Construction
Double thermo-glazed door with open frame construction, for cool outside door panel. Swing hinged easy-release inner glass on door for easy cleaning.
304 AISI stainless steel bowl - 5 lt capacity.
Power: 370 watts.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Fault code display.
Fully pressed bottom plate and rounded corners for easier cleaning.
Heavy duty Stainless steel construction.
Incorporated drain pump to control water level in wash tank draining.
Interchangeable wash/rinse arms screw out for simple clean up.
Interior base with rounded corners, pressed from a single sheet.
Interior of well with rounded corners for ease of cleaning.
Internal and external doors, front, back and side panels in AISI 304 Stainless steel.
Lockable door.
Mounted on adjustable Stainless steel feet, with castors as an option.
Refrigerant type: R134a.
Refrigerant type: R290.
Remote refrigeration unit.
1 speed: 1.500 rpm.
Stainless steel top provides a heavy duty work surface under any load.
Water protected planetary system (IP55 electrical controls, IP23 overall machine).
Worktop in 304 AISI stainless steel.
IPx4 water protection.
IPX5 water resistance certification.
AISI 304 stainless steel worktop, 2mm thick.
Constructed from AISI 304 Stainless steel throughout to meet the highest hygiene standards.
Constructed from the highest quality AISI 304 Stainless steel.
Constructed entirely in stainless steel to offer maximum durability.
Entirely constructed in 304 AISI stainless steel.
Square section legs and 40 mm height-adjustable feet in 304 AISI stainless steel.
100 mm upstand with 8 mm radioused corner and 13 mm deep, designed to be used against a wall.
50 mm worktop in 304 AISI stainless steel with upturned edges, incorporates an 18 mm layer of sound deadening material.
304 AISI stainless steel feet, 200 mm high and 54 mm in diameter, adjustable by -50/+30 mm.
Drawers in AISI 304 stainless steel with one-piece interior and rounded corners to facilitate cleaning and improve hygiene can hold GN containers with a maximum height of 100 mm. Maximum load capacity of 40 kg.
50 mm worktop in 304 AISI stainless steel, 10/10 in thickness with overflow rim along the top.
Accessories available on request: lower shelf, tap unit, false bowl bottom, overflow filter, single or double syphons.
Bottom part of drain left free to house an undercounter dishwasher.
Hinged door with sound deadening internal panels, fitted with 304 AISI stainless steel hinges on the inner sides.
Equipped with square 25x25mm legs.
Uprights and shelf frames constructed entirely in anodized aluminium (20 micron).
Included splashback to prevent water spatter.
40x40 mm square tubular legs in AISI 304 stainless steel.
To be secured to the dishwasher and fitted with one pair of legs at the other end.
Unit to feature rinse aid dispenser pump.
Delivered in knock-down package.
Wide range of taps are available to suit every need.
Equipped with intermediate shelf which can be positioned at three different heights.
Intermediate shelf in stainless steel with riveted corners and trasversal reinforcement in stainless steel.
Sturdy sound-deadened sliding doors on tracks located flush to the front of the frame.
Easy access to the cupboard interior on all lengths guaranteed by the use of only 2 doors.
Sink bowl in 304 AISI stainless steel, supplied with overflow drain pipe and drain hole.
Drainage area suitable for drying operations
Table can be equipped with a mobile bin with lid for waste disposal (optional accessory).
Eyebolts and screw anchors for ceiling installation.
Internal baffle to facilitate steam condensation and collection.
Large perimetral gutter to collect steam condensation.
Motorised tilting.
Electromechanical control.
Ergonomic and user friendly thanks to the high tilting position and the pouring lip design which allow to easily fill containers.
304 AISI stainless steel top with rounded edges.
Pre-arranged for drain-pipe.
Built-in refrigeration unit.
Environmentally friendly: R404a as refrigerant fluid.
Thermostatic expansion valve to optimize the cooling unit efficiency.
IP55 waterproof ON/OFF buttons, IP24 throughout the entire machine.
Delivered with UK plug.
Power: 350 watts.
Water protected motor unit (controls are IP55, IP34 throughout machine).
2 mm top in 1.4301 (AISI 304).
Pre-arranged for on-site HACCP implementation and Energy Management device.
Double skin insulated hood.
Transparent solid safety screen made of Eastman Tritan™ copolyester BPA free, impact resistant and stays clear and durable after several dishwashing cycle.Eastman&Tritan are trademarks for Eastman Chemical Company.
Sturdy metal accessory hub able to withstand heavy usage.
IP67 complete waterproof.
Square section legs (40x40mm, 10/10 in thickness) and height-adjustable feet (-20/+30mm).
2 compartments with 2 doors.
3 compartments with 3 doors.
4 compartments with 4 doors.
AISI 430 stainless steel internal structure and external panels.
The unit is designed for freestanding installation having external frame closed on sides, back and bottom.
Mainly construction in A304 stainless steel for everlasting operation in all working environment.
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
4 rubber feet.
One piece pressed work top in Stainless steel.
Factory fitted: installed directly by the factory.
Stainless steel AISI 304 internal and external panels including back.
Finished in top quality stainless steel with double skinned construction to aid durability and reduce noise.
Foamed body covered by a curved panel in galvanized steel, with serigraphy in four colors.
Polypropylene basin for liquid.
Internal components (arms and filter) are easy extractable.
Door with integrated sealing mechanism to prevent water leakage.
Large tank filter collects the soil to keep the wash water clean for a longer time and have better washing performance.
304 AISI stainless steel front panel, load bearing frame, wash tank, tank filter, wash and rinse arms.
Unit is 900mm deep to give a larger working surface area.
Modularity design allows the machine not only be disassembled for delivery and re-assembled at customer’s site, but also to be customized and upgraded on-site and over time.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
Sturdy sound-deadened hinged doors on tracks located flush to the front of the frame.
Unit without backpanel for easy installation.
Aluminum smooth top contact plate (215 x 215 mm) treated with a special non-stick coating.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
All main components made in heavy duty anti-corrosive 304 type stainless steel: internal chamber, external, front and side panels, pre-wash arms and rack transportation system.
All main components made in heavy duty anti-corrosive 304 type stainless steel: internal chamber, external, front and side panels, door and rack transportation system.
Rolling rack included
Independent temperature setting of the top and bottom plates from 50 to 250 °C.
Delivered with IEC 309 3P+N+E IP44 380/480V 16A plug.
Main on/off switch for added safety.
Removable stainless steel basket (base in aluminium), 65 liters capacity.
Usable capacity of the well 50 liters.
Usable capacity of the well 85 liters.
Space saving design – 18cm wide.
Pre-mix dispenser with stainless steel base and clear plastic bowls.
Compact size of 27 cm wide saves valuable counter space.
Temperature range from 1.7 - 5° C.
Compact size of 52 cm wide saves valuable counter space.
Removable drip tray.
Conveyors optionally equipped with end-limit switch, guides for racks, and undershelves.
Electronic control to select temperatures.
Half brew/full brew options.
Heavy duty construction entirely in AISI 304 stainless steel to offer maximum durability.
Removable stainless steel drip tray.
Table top unit can be wall mounted with dedicated optional accessory.
Two double-walled sliding doors flush fitting to the front of the frame can be removed to facilitate cleaning of the cupboard interior.
304 AISI stainless steel feet, 150 mm high and 54 mm in diameter, adjustable by -35/+25 mm.
Chromium-plated steel grid with a safety stop to avoid accidental fall.
Heavy-duty, locking casters keeps the unit in place but allow position adjusting.
Locking lid to protect contents of the unit.
Internal drain for easy clean out.
Stainless steel interior and exterior, durable and easy to clean for daily commercial use.
Holds 6 1/3 pans.
Heavy duty casters.
Insulated lid maintains food freshness.
Holds (6) 1/6 & (2) 1/9 pans.
Holds 12 1/6 pans.
Holds 16 1/6 pans.
Holds 18 1/6 pans.
Holds 9 1/3 pans.
Holds 12 1/3 pans.
Holds 30 1/6 pans.
Integrated spray gun with automatic retracting system for fast rinsing.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side, back panels and internal chamber, wash and arms, tank filters, doors.
No leg in loading area.
Double tank filters (flat and small strainer) cover the entire width of the tank.
Pre-wired heavy duty power cord.
Heavy duty door hinges.
Magnetic gasket removable without tools for easy cleaning.
Electronic control to select temperatures.
Cold Wall evaporator.
The unit is built on modularity concept to easily connect with dual rinse rack type dishwasher without any modification including power, inlet water, drain water, detergent and rinse aid connections.
Cooking surface completely ribbed.
Self closing doors.
Heavy duty drawer runners.
Tempered glass viewing pains & sliding lids
Plexiglass sliding shields.
Locking lids and key protect the contents of the unit.
Heavy duty rails for sliding doors
A remote blast chiller and remote condensing unit should be sized appropriately for the application. System design and installation should be managed by a qualified HVAC engineer. This includes unit placement, pipe sizing, pipe routing, and refrigerant charge. Warranty coverage and specified performance are not guaranteed for improperly designed or installed systems.
The patented I-Tank insulated bowl reduces the impact of ambient temperature on the product, improving its cooling efficiency and guaranteeing energy and cost savings.
The mechanical control allows you to manually set the “production mode” and the “night mode”.
Holds 10 1/6 pans
Holds 15 1/6 pans
Unit to feature smooth surfaces to facilitate cleaning.
