Front Loading Pot and Pan Washers
Warewashing
Green&Clean Large Opening Hot Water Sanitizing Pot and Pan Washer - WT850
COD 506033
Pot & Pan Washer, 61-1/8" wide, front load design, approximately 10 racks/hour capacity, hot water sanitizing with built-in booster heater, stainless steel construction, ETL, ENERGY STAR®
Specifications
-
Electric
Supply voltage: 208 V/3 ph/60 Hz
Total Watts: 17.5 kW
Booster heating elements:
Tank heating elements: 10,5 kW
Wash pump size: 7.0 hp (5.4 kW)
Minimum current: 56A
Maximum Over-Current Protection (MOP): 60A
Minimum Circuit Ampacity (MCA): 62A
-
Water
Water supply pressure: 7-102 psi (50-700 kPa)
Water supply temperature**: 122°F (50 °C)
Colder incoming water supply may lengthen wash cycle time.
Inlet Water supply hardness: 7-14 (°fH) / 4-8 (°dH)
Water consumption per square foot of rack: 0.33 gallons (1.2 L)
Water consumption per cycle: 3.2 gallons (12 L)
Initial fill water consumption: 39.6 gallons (150 L)
Booster Capacity: 4.76 gal (18 L)
Tank Capacity: 39.63 gal (150 L)
Incoming water line size: 0.75" (19.05 mm)
Drain line size: 1.625" ID (40 mm) free fall drainage
-
Key Information
Racks per hour: 10 (6 minute cycle); 6 (10 minute cycle); 4 (15 minute cycle)
N° of working cycles - sec.: 4 (360/600/900/inf)
Wash Temperature (MIN): 158 °F (70 °C)
Rinse temperature (MIN): 183.2°F (84°C)
External dimensions, Width: 61 1/8" (1552 mm)
External dimensions, Depth: 35 7/16" (900 mm)
External dimensions, Height: 70 1/2" (1791 mm)
Net weight: 661 lbs (300 kg)
Shipping width: 70 7/8" (1800 mm)
Shipping depth: 43 5/16" (1100 mm)
Shipping height: 86 5/8" (2200 mm)
Shipping weight: 849 lbs (385 kg)
Shipping volume: 153.81 ft³ (4.36 m³)
Predisposed for external detergent connections
-
Sustainability
Noise level: <70 dBA
Product Features
