Warewashing
Green&Clean Hot Water Sanitizing Pot and Pan Washer - WT830 506029
Warewashing Green&Clean Hot Water Sanitizing Pot and Pan Washer - WT830
Product Features
-
Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
-
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
-
Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
-
High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.
-
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
-
High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.
-
Open air gap in compliance with WRC regulations.
-
Open air gap in compliance with WRC regulations.
-
4 washing programs (one program is continual).
-
4 washing programs (one program is continual).
-
Equipped with drain pump and built-in detergent dispenser for easy and quick installation without opening the machine.
-
Equipped with drain pump and built-in detergent dispenser for easy and quick installation without opening the machine.
-
Easier access to the washing chamber thanks to the 180° frontal opening door.
-
Easier access to the washing chamber thanks to the 180° frontal opening door.
-
Requires limited space for opening thanks to the door divided in 2 sections.
-
Requires limited space for opening thanks to the door divided in 2 sections.
-
Self-cleaning cycle.
-
Self-cleaning cycle.
-
Low noise level.
-
Low noise level.
-
Simple electronic control panel.
-
Simple electronic control panel.
-
Fault auto-diagnosis system.
-
Fault auto-diagnosis system.
-
Simple service from the front.
-
Simple service from the front.
-
304 stainless steel boiler with higher welding protection to increase resistance to corrosion.
-
External connecting board protected by a waterproof plastic box.
-
Unit to feature smooth surfaces to facilitate cleaning.
-
Easy to remove pump and tank filters.
-
Large strainer box above the water surface for frequent cleaning operations.
-
Double skin insulated door to reduce heat dispersion.
-
Equipped with side washing arms in addition to upper and lower wash arms.
-
Pre-arranged to be connected to Energy Management device.
-
Available upon request, pre-arranged model for HACCP implementation (both basic as well as integrated system).
-
304 AISI stainless steel front and side panels, wash tank, tank filter and wash and rinse arms.
-
Unit to feature rinse aid dispenser pump.
Specifications
Electric
- Supply voltage: 208 V/3 ph/60 Hz
- Total Watts: 14.8 kW
- Booster heating elements:
- Tank heating elements: 7 kW
- Wash pump size: 3.5 hp (2.7 kW)
- Minimum current: 45A
- Maximum Over-Current Protection (MOP): 50A
- Minimum Circuit Ampacity (MCA): 48A
Key Information:
- Racks per hour: 10 (6 minute cycle); 6 (10 minute cycle); 4 (15 minute cycle)
- N° of working cycles - sec.: 4 (360/600/900/inf)
- Wash Temperature: 158 °F (70 °C)
- Rinse temperature (MIN): 183.2°F (84°C)
- External dimensions, Width: 34 1/2" (876 mm)
- External dimensions, Depth: 35 7/16" (900 mm)
- External dimensions, Height: 70 1/2" (1791 mm)
- Net weight: 441 lbs (200 kg)
- Shipping width: 44 1/16" (1120 mm)
- Shipping depth: 43 5/16" (1100 mm)
- Shipping height: 86 5/8" (2200 mm)
- Shipping weight: 606 lbs (275 kg)
- Shipping volume: 95.71 ft³ (2.71 m³)
- Noise level: <70 dBA
- Predisposed for external detergent connections
Water:
- Water supply pressure: 7-102 psi (50-700 kPa)
- Water supply temperature**: 122°F (50 °C)
- Colder incoming water supply may lengthen wash cycle time.
- Inlet Water supply hardness: 7-14 (°fH) / 4-8 (°dH)
- Water consumption per square foot of rack: 0.35 gallons (1.3 L)
- Water consumption per cycle: 1.6 gallons (6.2 L)
- Initial fill water consumption: 25 gallons (95 L)
- Booster Capacity: 4.76 gal (18 L)
- Tank Capacity: 25.1 gal (95 L)
- Incoming water line size: 0.75" (19.05 mm)
- Drain line size: 1.625" ID (40 mm) free fall drainage
Documents
- CAD Drawings
- Data Sheet
Related Products
Warewashing
Green&Clean High Opening Hot Water Sanitizing Pot and Pan Washer - WT830506031Pot & Pan Washer, 34-1/2" wide, high opening, front load design, approximately 10 racks/hour capacity, hot water sanitizing with built-in booster heater, stainless steel construction, ETL, ENERGY STAR®- Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
- Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
- Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
- High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.
Warewashing
Green&Clean Large Opening Hot Water Sanitizing Pot and Pan Washer - WT850506033Pot & Pan Washer, 61-1/8" wide, front load design, approximately 10 racks/hour capacity, hot water sanitizing with built-in booster heater, stainless steel construction, ETL, ENERGY STAR®- Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
- Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
- Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
- High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.