Modular Cooking Range Line 900XP 6-Burner Gas Boiling Top, 7.5 kW - Town Gas (COD 391196)
Where to buy
Gas Boiling Tops

Modular Cooking Range Line
900XP 6-Burner Gas Boiling Top, 7.5 kW - Town Gas

COD 391196

6-Burner (7,5 kW each) gas Boiling Top - town gas

Specifications

  • Gas Power: 60 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Town Gas

    Gas Inlet: 1/2"

  • Front Burners Power: 7.5 - 7.5 kW

    Back Burners Power: 7.5 - 7.5 kW

    Middle Burners Power: 7.5 - 0/7.5 - 0 kW

    Back Burners Dimension - mm Ø 100 Ø 100

    Front Burners Dimension - mm Ø 100 Ø 100

    Middle Burners Dimension - mm Ø 100 Ø 100

    External dimensions, Width: 1200 mm

    External dimensions, Depth: 930 mm

    External dimensions, Height: 250 mm

    Net weight: 90 kg

    Shipping weight: 110 kg

    Shipping height: 540 mm

    Shipping width: 1020 mm

    Shipping depth: 1300 mm

    Shipping volume: 0.72 m³

    If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.

    Certification group: N9CT

Product Features

Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The six 7.5 kW high efficiency burners are available in 100 mm diameter with continuous power regulation.
Gas appliance supplied for use with town gas.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
The special design of the control knob system guarantees against water infiltration.
IPx4 water protection.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
AISI 304 stainless steel worktop, 2mm thick.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×