Appliance is IPX5 water resistance certified.
Incoloy armoured elements with safety thermostat positioned in the jacket cavity base.
Energy regulation through a control knob.
Large drain with manual ball-valve for fast emptying of well.
Continuous water filling regulated through a manual water tap.
Safety thermostat to avoid operation without water.
Water basins in 316 type Stainless steel.
Water basins are seamlessly welded into the top of the appliance.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
The special design of the control knob system guarantees against water infiltration.
Solenoid valve to refill with hot and cold water.
Safety valve avoids overpressure of the steam in the jacket.
Safety thermostat protects against low water level.
Round kettle is suitable to cook, sauté or poach all kinds of produce.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
No overshooting of cooking temperatures, fast reaction.
Right angled side edges eliminate gaps and possible dirt traps between units.
Manometer allows to correctly control the functioning of the pan.
Large capacity food tap enables safe and effortless discharging of contents.
Pressed cooking vessel and lid in 316 AISI Stainless steel.
Heavy duty internal frame in Stainless steel.
All major compartments located in front of unit for ease of maintenance.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Easy-to-use control panel.
Discharge tube and tap are very easy to clean from outside.
Lid and cooking vessel in stainless steel. Sides of vessel with satin finishing for easy cleaning.
Minimum load for correct funtioning is 20 liters.
IPx4 water protection.
AISI 304 stainless steel worktop, 2mm thick.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Stainless steel top provides a heavy duty work surface under any load.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.