Digital Undercounterecostore HP Concept Refrigerated Counter - 2 Door with Splashback (COD 710198)
Where to buy
ecostore HP Concept Refrigerated Counters - 2 comp. with top and upstand

Digital Undercounter
ecostore HP Concept Refrigerated Counter - 2 Door with Splashback

COD 710198

2-door Refrigerated Counter, -2+10°C. AISI 304, with splashback

Specifications

  • Supply voltage: 220-240 V/1 ph/50 Hz

    Electrical power max.: 0.22 kW

    Defrost Power: 0.27 kW

    Current consumption: 1.7 Amps

    Plug type: CE-SCHUKO

  • Gross capacity: 290 lt

    Net Volume: 180.8 lt

    Door hinges: 1 Left+1 Right

    External dimensions, Width: 1245 mm

    External dimensions, Depth: 700 mm

    External dimensions, Height: 1000 mm

    Internal Dimensions, Width: 798 mm

    Internal Dimensions, Depth: 560 mm

    Internal Dimensions, Height: 550 mm

    Net weight: 100 kg

    Shipping volume: 1.23 m³

    Depth with doors open: 1110 mm

    Height adjustment: -5/50 mm

  • Energy Class: A

    Yearly and daily energy consumption: 528kWh/year - 1kWh/24h

    Climate class: Heavy Duty (5)

    Energy Efficiency Index (EEI): 23,45

  • Control type: Digital

    Compressor power: 0.25 hp

    Refrigerant type: R134a

    GWP Index: 1300

    Refrigeration power: 358 W

    Refrigeration power at evaporation temperature: -10 °C

    Refrigerant weight: 90 g

    Min/Max internal humidity: 40/85

    Operating temperature min.: -2 °C

    Operating temperature max.: 10 °C

    Operating mode: Ventilated

Product Features

Tropicalized unit (43°C ambient temperature).
Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Equipped with forced air circulation system for rapid cooling and temperature distribution within the cell.
Certified safety CE requirements.
External back panel in galvanized steel.
External bottom panel in stainless steel.
Mounted on stainless steel feet to give 150 mm (-5/+50 mm) clearance for ease of cleaning the floor.
Frontal and easy access to all components in the cooling unit.
Combination of doors and drawers to suit any configuration needed, with the possibility to change the configuration on site. Right cooling unit available on request.
Fitted with 90 mm thickness of cyclopentane insulation for best insulating performance (thermal conductivity: 0,020 W/m*K) and lowest environmental impact (GWP=3).
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
Top energy efficiency (class A) and granted uniformity even at extreme working conditions (class 5; 40°C and 40% humidity): unbeatable performance, certified by energy test protocol EN16825:2016.
Hot gas automatic evaporation of defrost water.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Raised rear upstand permits unit to be connected up against the wall for better hygiene.
Anti-tilt runners accept GN 1/1 containers.
Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Self closing stainless steel doors (< 90°).
Removable triple-chamber balloon magnetic gasket to improve insulation and reduce energy consumption and ease of cleaning.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Adjustable temperature range from -2 °C to +10 °C to suit meat, fish and dairy storage requirements.
Anti-drip profile on stainless steel worktop edge.
Built-in refrigeration unit.
Worktop in AISI 304 Stainless steel with a 50 mm profile.
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
Interior base with rounded corners, pressed from a single sheet.
Fault code display.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
CFC and HCFC free (ecological refrigerant type: R134a, - gas in foam: cyclopenthane).
Excellent space optimisation thanks to the compact dimensions.
Extractable cooling unit to facilitate maintenance.
2 compartments with 2 doors.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×