Warewashinggreen&clean hood type Dishwasher, Manual with Filtering System (COD 504267)
Where to buy
green&clean Hood Type - double skin manual

Warewashing
green&clean hood type Dishwasher, Manual with Filtering System

COD 504267

Hood Type Dishwasher, with double skin, insulated manual hood and CLEAR BLUE Filtering System, 80r/h

Specifications

  • Supply voltage: 400 V/3N ph/50 Hz

    Convertible to: 230V 1N~; 230V 3~

    Default Installed Power: 9.9 kW

    Reducible Installed Power:* 6.9 kW

    Boiler Heating Elements Power: 9 kW

    Boiler Reducible To:* 6 kW

    Tank heating elements: 3 kW

  • Water supply temperature*: 10-65 °C

    Drain line size: 20.5 mm

    Inlet water supply pressure: 0.5-7 bar

    Water consumption per cycle (lt): 2

    Boiler Capacity (lt): 12

    Tank Capacity (lt): 24

  • N° of cycles: 3

    Duration cycle:* 45/84/150 sec.

    Duration cycle - NSF/ANSI 3 compliant: 57/84/150 sec.

    Racks per hour:* 80

    Racks per hour - NSF/ANSI 3 compliant: 63

    Dishes per hour:* 1440

    Dishes per hour - NSF/ANSI 3 compliant: 1134

    Wash temperature: 55-65 °C

    Wash temperature - NSF/ANSI 3 compliant: 75 °C

    Rinse temperature: 84 °C

    External dimensions, Width: 752 mm

    External dimensions, Depth: 755 mm

    External dimensions, Height: 1567 mm

    Net weight: 117 kg

    Shipping weight: 129 kg

    Shipping volume: 1.23 m³

    Packaging size

    (WxDxH): 667x755x1567 mm

    Noise level: <63 dBA


    * According to market standard, the productivity is declared at an inlet water supply temperature of 50°C . If the water is supplied at 65°C, the power can be reduced by 3 kW without any loss in productivity.

    ** When connected to cold water, the cycle time will be prolonged accordingly. The machine will have productivity per hour of 48 racks at 10°C supply temperature or 55 racks at 20°C supply temperature

  • Latent heat: 500 W

    Sensible heat: 2000 W

Product Features

IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
The machine can be connected to cold water.
45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).
Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.
NSF/ANSI 3 and DIN 10512 compliant.
Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
Incorporated Soft Start feature to offer additional protection to more delicate items.
Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
Built-in atmospheric boiler sized to raise incoming water to a minimum of minimum 84 °C for sanitizing rinse. No external booster is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.
Requires only 2 liters of water per washing cycle thus ensuring low energy, water, detergent and rinse aid consumption.
CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
Unique temperature interlock guarantees required temperatures in both the wash and final rinse in case of emergency cold water feeding.
Three phase electrical connection, convertible to single phase on-site.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
Cycle may be interrupted at any time by lifting the hood.
Built-in rinse aid dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.
Pressed tank in front position to facilitate cleaning.
Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.
Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.
Pre-arranged for on-site HACCP implementation and Energy Management device.
Unit to include drain pump and rinse aid dispenser pump.
Double skin insulated hood.
Element protection from dry fire and low water.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×