WarewashingSmall Pot & Pan Washer with Drain Pump & Detergent Dispenser (COD 506071)
Where to buy
Front loading Pot&Pan washers

Warewashing
Small Pot & Pan Washer with Drain Pump & Detergent Dispenser

COD 506071

Electric Pot&Pan Washer with electronic control, detergent and rinse aid dispenser - Marine

Specifications

  • Supply voltage: 440 V/3 ph/60 Hz

    Default Installed Power: 13 kW

    Electrical power max.: 20 kW

    Wash pump power: 2.5 kW

  • Pressure, bar min/max: 0.5-7 bar

    Water supply temperature*: 50 °C

    Washing tank capacity (lt): 95

    Boiler Capacity (lt): 18

    Washing cycle electrical elements: 7 kW

    Hot rinse cycle duration (sec.): 20

    Rinsing water consumption (per cycle): 7 lt

  • Washing cycle temperature: 55-65 °C

    Hot rinse cycle temperature: 84 °C

    N° of working cycles: 4 (180/360/540/inf)

    Cell dimensions - width: 670 mm

    Cell dimensions - depth: 710 mm

    Cell dimensions - height: 570 mm

    External dimensions, Width: 876 mm

    External dimensions, Depth: 900 mm

    External dimensions, Height: 1791 mm

    Net weight: 200 kg

    Shipping weight: 230 kg

    Shipping height: 2030 mm

    Shipping width: 1040 mm

    Shipping depth: 1040 mm

    Shipping volume: 2.2 m³

Product Features

Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
Equipped with drain pump and built-in detergent dispenser for easy and quick installation without opening the machine.
Simple service from the front.
Atmospheric insulated boiler combined with the rinse booster pump for perfect rinsing results (water temperature and pressure always constant during rinsing cycles), independent from the inlet water pressure.
Open air gap in compliance with WRC regulations.
4 washing programs (one program is continual).
Simple electronic control panel.
Requires limited space for opening thanks to the door divided in 2 sections.
Self-cleaning cycle.
Easier access to the washing chamber thanks to the 180° frontal opening door.
Low noise level.
High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back into the network as a result of a sudden drop in main pressures.
Fault auto-diagnosis system.
Large strainer box above the water surface for frequent cleaning operations.
Double skin insulated door to reduce heat dispersion.
Equipped with side washing arms in addition to upper and lower wash arms.
Pre-arranged to be connected to Energy Management device.
Available upon request, pre-arranged model for HACCP implementation (both basic as well as integrated system).
Easy to remove pump and tank filters.
External connecting board protected by a waterproof plastic box.
304 AISI stainless steel front and side panels, wash tank, tank filter and wash and rinse arms.
Unit to feature smooth surfaces to facilitate cleaning.
304 stainless steel boiler with higher welding protection to increase resistance to corrosion.
Unit to feature rinse aid dispenser pump.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×