Modular Cooking Range Line 700XP One Well Gas Fryer Top 7 liter (COD 371422)
Where to buy
Gas Fryer Tops

Modular Cooking Range Line
700XP One Well Gas Fryer Top 7 liter

COD 371422

7-lt gas Fryer Top with 1 "V" shape well (external Burners) and 1 basket, Q Mark

Specifications

  • Gas Power: 7 kW

    Standard gas delivery: G30 – 50 mbar

    Gas Type Option: G31 37 mbar

    Gas Inlet: 1/2"

  • Usable well dimensions (width): 240 mm

    Usable well dimensions (height): 235 mm

    Usable well dimensions (depth): 380 mm

    Well capacity: 5.5 lt MIN; 7 lt MAX

    Thermostat Range: 105 °C MIN; 185 °C MAX

    Net weight: 30 kg

    Shipping weight: ISO 9001; ISO 14001 kg

    Shipping height: 520 mm

    Shipping width: 460 mm

    Shipping depth: 820 mm

    Shipping volume: 0.2 m³

    If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.

    Certification group: N7FG

Product Features

Optional portable oil quality monitoring tool (code 9B8081) for efficient oil management.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
Deep drawn V-Shaped well.
High efficiency 7 kW burners in stainless steel with flame failure device attached to the outside of the well.
Thermostatic regulation of oil temperature up to a maximum of 185 °C.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Oil drains through a tap positioned on the front the well.
All major compartments located in front of unit for ease of maintenance.
Piezo spark ignition for added safety.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
IPx4 water protection.
Q Mark model delivered with nozzles for G30-50 mbar.
Interior of well with rounded corners for ease of cleaning.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×