hygiene&clean Hood Type with DIN 10512 and A0 60 certification 504149
Hood Type Dishwasher, with double skin insulated automatic hood, WASH-SAFE CONTROL, ZERO LIME Device, CLEAR BLUE Filtering System, built-in detergent and rinse aid dispenser and drain pump, DIN 10512 and A0 60 certification, 80r/h
The machine can be connected to cold water.
High efficiency air gap (class A) in water inlet circuit to avoid water being siphoned back contaminating the network is compliant with EN 61770 standard, WRAS, Belgaqua back-flow prevention requirements.
An effective rinse system uses only 2 litres (1st & 2nd cycle) or 4.5 liters (3rd cycle as Disinfection cycle) of clean hot water per basket for perfect disinfection result at low energy, water, detergent and rinse aid consumption.
Maximum capacity per hour of 80 racks or 960 dishes.
Built-in atmospheric boiler sized to raise incoming water to a minimum of minimum 90 °C for sanitizing rinse. No external booster is required. Constant temperature of 90 °C throughout the rinsing cycle regardless of the network's water pressure.
Handle-free operation to avoid cross- contamination thanks to automatic start on hood closure and automatic hood lifting when cycle ends.
Cycle cannot be interrupted thanks to control panel lock ensuring the complete cycle is performed.
45/84 second cycles is certified according to DIN 10512 standard. While 320 second cycle is certified A0 60 level according to EN 15883-1 standard which including final pause to improve the drying result to avoid water residuals on the washed wares.
Performance is certified for disinfection level according to DIN 10512 standard (1st and 2nd cycle) and A0 60 level according to EN 15883-1 standard (3rd cycle as Disinfection cycle) by independent third party.
ZERO LIME Device ensures total scale removal from the boiler, the hydraulic circuits and the washing chamber allowing ultimate performances and lower energy consumption thanks to the high-efficiency heating element.
CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly.
Unique temperature interlock guarantees required temperatures in both the wash and final rinse.
Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
Incorporated Soft Start feature to offer additional protection to more delicate items.
Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
Three phase electrical connection, convertible to single phase on-site.
LED strip on the top keeps operator informed on machine status.
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Element protection from dry fire and low water.
Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.
Pressed tank in front position to facilitate cleaning.
Automatic double skin insulated hood.
Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.
Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.
Pre-arranged for on-site HACCP implementation and Energy Management device.
Unit to include drain pump and rinse aid dispenser pump.
- Supply voltage: 400 V/3N ph/50 Hz
- Convertible to: 230V 1N~; 230V 3~
- Default Installed Power: 9.9 kW
- Boiler Heating Elements Power: 9 kW
- Tank heating elements: 3 kW
- Wash pump power: 0.8 kW
- N° of cycles: 3
- Duration cycle:* 45/84/320 sec.
- Racks per hour:* 80
- Dishes per hour:* 960
- Wash temperature: 71-77 °C
- Rinse temperature: 90 °C
- External dimensions, Width: 667 mm
- External dimensions, Height: 1567 mm
- External dimensions, Depth: 755 mm
- Net weight: 119 kg
- Shipping weight: 142 kg
- Shipping volume: 1.01 m³
(WxDxH): 760x670x1630 mm
- Noise level: <63 dBA
* According to market standard, the productivity is declared at an inlet water supply temperature of 50°C.
- ** Hot rinse water consumption of 3rd cycle is 4.5lt/cycle.
- Water supply temperature*: 10-65 °C
- Drain line size: 20.5 mm
- Inlet water supply pressure: 0.5-7 bar
- Min hot rinse water consumption per cycle (lt)**: 2
- Boiler Capacity (lt): 12
- Tank Capacity (lt): 24