Modular Cooking Range Line 900XP 2-Burner Gas Boiling Top, 10 kW (COD 391001)
Gas Boiling Tops HP

Modular Cooking Range Line
900XP 2-Burner Gas Boiling Top, 10 kW

COD 391001

2-Burner (10 kW each) gas Boiling Top

Specifikationer

  • Gas Power: ISO 9001; ISO 14001 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 1/2"

  • Front Burners Power: ISO 9001; ISO 14001 - kW

    Back Burners Power: 10 - 0 kW

    Back Burners Dimension - mm Ø 100

    Front Burners Dimension - mm Ø 100

    External dimensions, Width: 400 mm

    External dimensions, Depth: 930 mm

    External dimensions, Height: 250 mm

    Net weight: 43 kg

    Shipping weight: 43 kg

    Shipping height: 530 mm

    Shipping width: 480 mm

    Shipping depth: 1020 mm

    Shipping volume: 0.26 m³

    If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.

    Certification group: N9CG

Produktegenskaber

Control knobs provide smooth, continuous rotation from min to max power level.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The two 10 kW high efficiency burners are available in 100 mm diameter with continuous power regulation from 2.2 kW to 10 kW.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
AISI 304 stainless steel worktop, 2mm thick.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×